APA Quick & Dry Rear Light Tint Film – Gloss Air Release Quality Tint

APA Quick & Dry Rear Light Tint Film – Gloss Air Release

Give your rear lights a clean, smoked appearance with APA Quick & Dry Rear Light Tint Film. This premium automotive film features air-release adhesive technology, helping trapped air escape during installation for a smoother, bubble-free finish.

Available in four tint shades: Light, Mid, Dark and Ultra Dark, allowing you to choose the level of smoked appearance that best suits your vehicle.

The film features a super gloss finish and is supplied with a protective PET surface liner to protect the gloss face during handling and installation. The PET liner must be removed as part of the installation process.

Key Features

• Genuine APA Quick & Dry film
• Air-release / air-channel adhesive technology
• DRY APPLICATION ONLY
• Available in Light, Mid, Dark & Ultra Dark
• Premium super gloss finish
• Protective PET surface liner
• Conformable automotive vinyl
• Suitable for rear / tail lights
• Easier installation with reduced risk of trapped air

⚠️ IMPORTANT – DRY APPLICATION ONLY

This is an air-release vinyl and must be applied DRY.

DO NOT spray water, soapy water or application fluid onto the adhesive side of the film. Do not wet the adhesive. Moisture can interfere with the air-release adhesive system and may result in poor adhesion, lifting or installation failure.

Quick Installation Guide

1. Clean the light thoroughly – remove all dirt, grease, wax, silicone, polish and other contamination.
2. Dry completely – the light, surrounding edges and gaps must be completely dry before application.
3. Position the film dry – do not use water or application fluid.
4. Apply gradually – work from the centre outwards using a suitable felt-edge squeegee, allowing air to escape through the adhesive channels.
5. Use controlled heat where required – gently warm the film to help conform it around curves and edges. Avoid excessive heat or overstretching.
6. Finish the edges carefully – ensure all edges are firmly applied and properly secured.
7. Remove the protective PET liner to reveal the final high-gloss finish.

Please note: Images are for illustrative purposes only. The finished shade can vary depending on the original colour/design of the rear light, ambient lighting and screen settings.

Road use: It is the buyer/installer's responsibility to ensure the finished lights comply with applicable vehicle lighting and roadworthiness regulations.